G50 Throw out bearing help (diagram??)-

[ZCAT3]

O.K. - so I am hopefully near the eand of a saga that began when my 930 transmission died in September. I am doing a G50 conversion and finally got all my parts together and installed the engine and tranny last night.

The car went into first fine but on the shift to second I heard a loud clunk and lost my cluytch pedal (I was testing this on my lift so no issues getting stranded). It turns out the clutch release part of the throw out bearing came out of the release bearing. So does anyone have an exploded diagram of the release bearing assembly as I surely must have screwed this up somehow (although I swear I reassembled it exactly as it was when I got it). The engine and tranny are back on the floor waiting for this issue to be resolved. Thanks -

[msterling]

Here's a pic from the parts catalog of a G50 throwout brg.

[ZCAT3]

Thanks - I actually need the assembly order of the bearing itself - there are severla washers and circlips and the bearing itself.

[ChrisL]

That looks like a 915 assembly. Here's the G50 assembly:



Chris.

[ZCAT3]

Thanks Chris -

I had part 3 completely pull apart into 2 pieces. The release arm mechanism is pressed into the bearing and then held with a circlip. The criclip came out and the release arm piece was pulled right out of the bearing by the clutch release fork. I also only to seem to have 1 number 5 washer. I wonder why this pulled apart on me??

[msterling]

Oops, sorry, wrong pic. It was the 930 4-speed.