|
|
|
|
| Author |
|
|
Registered
|
What are the rods in the top of the Webers
Attached is a pic from the top of a set of Webers. Beside the throat, there is a small metal tube which comes up between the throats. (left side of picture) There are 4 in total. What is their purpose? 3 of mine are loose and just spin. One is solid.
I have no idea what they do, if anything or whether they should be snug or loose. 
__________________
Jim Dean LL.B. - London, Ont, Canada. 1969 911T "Blood Orange" Euro (Brought over from Germany in 86) Engine and brake system rebuilds 2006 & 2007 "Oversteer scares passengers, understeer scares drivers." |
||
05-31-2005, 06:14 AM
|
|
|
Registered
|
Loose or snug? Does it matter? 3 of them just spin, but they don't seem to be backing out like they were threaded...
__________________
Jim Dean LL.B. - London, Ont, Canada. 1969 911T "Blood Orange" Euro (Brought over from Germany in 86) Engine and brake system rebuilds 2006 & 2007 "Oversteer scares passengers, understeer scares drivers." |
||
|
05-31-2005, 06:20 AM
|
|
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,483
|
doesn't matter.
__________________
https://www.instagram.com/johnwalker8704 8009 103rd pl ne Marysville Wa 98270 206 637 4071 |
||
|
05-31-2005, 07:09 AM
|
|
1969 Porsche 911T
