|
|
|
|
| Author |
|
|
Air Medal or two
Join Date: Jul 2003
Location: cross roads
Posts: 14,074
|
the cover unde the 915 trany
what do you find under that cover and it odd shaped under the 915?? whats it for ect. ect.?? The one I am speaking of is on the bottom and forward of the drain plug aways.
__________________
D troop 3/5 Air Cav,( Bastard CAV) and 162 Assult Helicopter Co- (Vultures) South of Saigon, U Minh Forest, Delta, and all parts in between |
||
06-05-2005, 07:59 PM
|
|
|
Registered
|
I have a stock 85 and no cover to speak of.
__________________
Just because I don't care doesn't mean I don't understand! Gordon Ost '85 Carrera Cab '01 Durango 5.9 R/T '00 Taurus SE- SO's canoe '97 KTM 250EXC FOND MEMORIES: '68 Pont Ventura Conv 389w/trips '99 BMW 323is '71 TR-6 very first car '73 TR-6 restored it-Concours winner '67 Lincoln Conti-suicide doors '70 Challenger-340-6pack slap stk '69 Dart GTS 440-4bl-4spd '73 Moto Guzzi Eldorado |
||
|
06-05-2005, 08:15 PM
|
|
|
Air Medal or two
Join Date: Jul 2003
Location: cross roads
Posts: 14,074
|
hmmm maybe the early 915s?? it looks like for access to ,to,,...I dono??something??
__________________
D troop 3/5 Air Cav,( Bastard CAV) and 162 Assult Helicopter Co- (Vultures) South of Saigon, U Minh Forest, Delta, and all parts in between |
||
|
06-05-2005, 09:03 PM
|
|
|
Registered
Join Date: Dec 1999
Location: TX USA
Posts: 9,804
|
All 915s have the shift fork cover/plate #5 in the diagram below!
You will find the guide fork #6 fastened by three studs, lock washers, and nuts. The #2 'dongle' is what's motion is constrained by the guide fork. Any loose studs should be secured with Red High-Strength Loctite, and the nuts get the Blue Medium-Strength Loctite! Sudden inability to select certain gears can be due to a loose guide fork! 
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
06-05-2005, 09:17 PM
|
|
