|
|
|
|
| Author |
|
|
Alter Ego Racing
Join Date: May 2002
Location: Florida
Posts: 5,553
|
Source for plastic DryBreaks???
Any leads on "affordable" sources for plastic dry-breaks? See pic attached for an example of what I'm looking for.
Thanks, Juan 
__________________
International GT Champion; Porsche GT3 Cup Trophy Champion; Klub Sport Challenge Champion; Rolex Vintage Endurance Series Champion; PCA Club Racing Champion; National Vintage Racing Champion |
||
08-17-2005, 05:58 AM
|
|
|
Registered
Join Date: Mar 2005
Location: Cincinnati,Ohio
Posts: 107
|
Juan,
We use these @ were I work for our ink jets that put a code date & production line data on finished product.Do a search for ink jet or code daters.Can't remember name of manufacture. One watch out: The barbed tips for the hose connection are very weak.One good bump will break them off!If carrying fluid.....well you can figure it out.Ask me how I know! Chris
__________________
"If you think it's gonna cost $1000, ya better budget for $2000." Chris 85 Carrera 3.2(Back on the road after rebuild) 02 Trans Am WS6 95 Eagle Talon 98 Bravada(sold) 07 G5 |
||
|
08-17-2005, 06:12 AM
|
|
|
Registered
Join Date: Aug 2002
Location: Boston
Posts: 390
|
the easiest place for stuff like this is www.mcmaster.com
Try a search for "Quick-Disconnect Tube Couplings" which should get you started. |
||
|
08-18-2005, 07:05 AM
|
|
