SUV Ride Height Problem Solved!
 

Finally lowered the 911 to it's intended beautiful ride height. Check it out...


Before:

http://www.gilmachine.com/pictures/2...s/IMG_7246.jpg

http://www.gilmachine.com/pictures/2...s/IMG_7233.jpg

After:

http://www.gilmachine.com/pictures/2...s/IMG_2639.jpg

http://www.gilmachine.com/pictures/2...s/IMG_2604.jpg

http://www.gilmachine.com/pictures/2...s/IMG_2608.jpg

http://www.gilmachine.com/pictures/2...s/IMG_2638.jpg

http://www.pelicanparts.com/support/smileys/wat3.gif

She looks great!!

What are the measurements from ground to fender?

Looks good but maybe a touch low in the front for the street.

Regards,

Markus
'80 SC Targa

Looks perfect to me, I would leave it. Now you need wider rubber in the rear......:D

Yeah, I know. I scored a set of 7 and 9s that are going to be the full time street tires in a few weeks.

About 24.75" to the fender or so. It's my daily driver now. Its hard to go back to driving anything else. Although bordering on too low, it's acceptable for the roads here in NJ, and they are pretty gross.