Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   RSR replica project update 3 (http://forums.pelicanparts.com/porsche-911-technical-forum/241569-rsr-replica-project-update-3-a.html)

Johnny B 09-18-2005 09:29 AM

RSR replica project update 3
 
Well time for another update as promised, hope no one is getting bored of this project yet.

As a lot of work has already been done I am doing updates about every 4 days or so until we get up to present day.

Here you see my 1994 3.6 engine hanging around waiting for its upgrades, both cosmetic and performance ones. These include, RUF engine management chip, PMO 50mm carbs, Weltmeister RSR pully hub (not sure what that does) and a whole lot of re painting and cleaning.

http://forums.pelicanparts.com/uploads6/61127063186.jpg

We decided to have the fuel filler cap mounted in the bonnet and used a motorcycle filler cap to acheive the effect we wanted.

http://forums.pelicanparts.com/uploa...1127063348.jpg

http://forums.pelicanparts.com/uploa...1127063411.jpg

A front mounted oil cooler is being used, we get quite nice locally manufactured ones here in SA. The body was cut at an angle to improve air flow.

http://forums.pelicanparts.com/uploa...1127063584.jpg

Front fenders are in place and the front end is starting to take shape and looking fantastic even if I say so myself.

http://forums.pelicanparts.com/uploa...1127063687.jpg

Rear arches and bootlid with tail have now been attached. I always wanted an RSR replica as I love the wide rear end, this shot says it all.

http://forums.pelicanparts.com/uploa...1127064239.jpg

Although it is not period correct, I wanted side sills on the car that flowed between the front and rear. I had these molded into the rear arches when they were made and here we are putting the final touches to joining them to the front fenders.

http://forums.pelicanparts.com/uploa...1127064392.jpg

Well thats it for now, next update in about 5 days.

As usual, any comments, good or bad, always appreciated.

Chuck Moreland 09-18-2005 09:41 AM

I think I can speak for all when I say we are not bored of the project. Keep the updates coming.

That hood filler cap looks cool. Where did you get it?

efhughes3 09-18-2005 10:43 AM

Chuck is correct, there can't be anyone here that would tire of seeing your updates. It looks like your really putting your own touches on what promises to be an awesome car. Keep up the good work!http://www.pelicanparts.com/support/smileys/wat6.gif

Did I mention I'm envious of your skills?

Jeff Alton 09-18-2005 10:44 AM

I agree with Chuck! Cool car in the making. When you go to carbs, what are you going to use for ignition? I saw you mentioned a RUF chip, but I am confused, as usual.

Jeff

Shuie 09-18-2005 11:47 AM

Nice work. I really like the gas filler setup!

Dutchie 09-18-2005 12:37 PM

yes really boring Johnny. Please continue boring us !

Cheers,

Oldporsche 09-18-2005 12:41 PM

Absolutely lovely.

Great neighborhood in which to do the work!

Keep on boring us, please.

David Duffield

Johnny B 09-18-2005 01:45 PM

Thanks for the comments guys appreciate it.

I have put a close up below of the filler cap, came of a bike, bought a tank from a scrap-yard and just cut it out to fit, think it was a Suzuki or Honda.

I am the guy the writes the cheques and is lucky enough to own the car when finished, but have no part in the skill involved in this project, that is all my mechanic and bodybuilder.

With my knowledge it is dangerous to change a light-bulb.

Not sure on ignition when we go to carbs, once again my mechanics area of expertise.

Thanks once again.

http://forums.pelicanparts.com/uploa...1127079875.jpg

http://forums.pelicanparts.com/uploa...1127079908.jpg

SteveM911 09-19-2005 05:22 AM

Please, Please, carry on being boring, it going to look great.

Cheers

Steve

Sameer 09-19-2005 05:49 AM

Johnny,
looks great, have to agree with you on the sexy rear arches

JeremyD 09-19-2005 05:58 AM

Wow - very nice touches...

m325ix 09-19-2005 06:38 AM

awesome work! keep those pics coming!
as the work will progress towards the end and the car will be near the complition, your anticipation will rise like a fever. Wait until the day you fire up that engine !

911SCfanatic 09-19-2005 06:57 AM

let's see more on the oil cooler mod to the body.

Johnny B 09-19-2005 08:06 AM

Bill sorry that is the only photo I currently have.

Will take more with oil cooler fitted and post in later updates.

thanks for interest.

FRANKENSTEIN 10-11-2012 07:47 AM

Martini RsR CAPE TOWN
 
JOH! JB. I like what u busy with' i bought a shell and motor a year ago' and wil b test drive' my RsR REPLICA over the wkend.. Lotsa Respect for u' bru.

prebordao 10-11-2012 09:59 AM

Johnny,

You mention as upgrades, a RUF chip and PMO carbs... How do those 2 go together ?

rattlsnak 10-12-2012 08:02 PM

PMO for fuel, RUF for ignition..

even though this thread is 7 years old..!

wachuko 10-12-2012 08:10 PM

Quote:

Originally Posted by rattlsnak (Post 7028609)
PMO for fuel, RUF for ignition..

even though this thread is 7 years old..!

This car is finished... I can remember seeing photos of it done... yeah, old thread!!

http://i151.photobucket.com/albums/s...1176939273.jpg

http://i151.photobucket.com/albums/s...1139539866.jpg

http://i151.photobucket.com/albums/s...1176939224.jpg


All times are GMT -8. The time now is 02:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.