Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Jubbie's Avatar
 
Join Date: Jun 2004
Location: Friendswood, TX
Posts: 500
Question What is that wire? Oil pressure indicator light

So on my 74' Targa I was fixing my oil pressure indicator light and I noticed that their were two green white wires that were connected to the light along with the one red black hot wire. I could not find the second one in the diagrams. I assume one of the green white wires is from the engine compartment. I was just curious what the other green white wire was.

Does anyone know what the second green white wire goes to? I figure it will be useful information someday.

Yesterday I had a good electrical day. The oil pressure indicator light did not work, the horn did not work and the left brake light did not work. I found that the oil pressure light socket was loose, the horn relay pins and contacts were compressed and dirty, and the brake light socket was oversized. With a little of this and a little of that I got all of them working after an evining in the garage. All and all a great night killing gremlins.

__________________
John F. Lewis

74' 911S Targa + 930/02
76' 914 - Eternal Type IV project FOR SALE
Old 10-01-2005, 02:55 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 03:01 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.