|
|
|
|
| Author |
|
|
Registered
|
Oil Pump - 3 rib version
Gents,
Need a little help . I will rebuild my 2.4 motor in the future and if I do the job or Henry  , I believe that I should replace the standard oil pump for the one in the picture. Here is what I know about the oil pump:+ This pump was purchased new about 10 years ago and was installed in a 2.7 R/S spec engine. + This past spring the engine suffered the classic 4th to 3rd gear upshift resulting in an over rev and damaged valves. + The engine is being reconfigured and no longer requries this pump. + No more than 20k miles was put on this unit . The pump is for sale, what is the going rate for one???? Also - what modifications must be done to the case...if any?? Thanks, Bavaria 
__________________
Bavaria911 1970 911T w/ 2.4S 1971 911T Targa w/ 2.2 Last edited by bavaria911; 10-16-2005 at 05:45 AM.. |
||
10-16-2005, 05:42 AM
|
|
|
Registered
|
Need some help gents...anyone can charm in please!
Bavaria
__________________
Bavaria911 1970 911T w/ 2.4S 1971 911T Targa w/ 2.2 |
||
|
10-16-2005, 09:38 AM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
1970 Porsche 911 T
1971 Targa 911T
