|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2004
Location: Sacramento, CA
Posts: 185
|
1970 2.2 Oil Pressure?
My Dad and I have rebuilt a 1970T 2.2 and are ready to start if for the first time.
Should the oil pressure read like the Druck/Pressure on my 1988 911 3.2? The gauge reads 0-20-60-100-140, so at idle where should the pressure be, and so on? |
||
11-08-2005, 03:08 PM
|
|
|
Registered
Join Date: Jun 2004
Location: Sacramento, CA
Posts: 185
|
bump.
|
||
|
11-09-2005, 05:34 AM
|
|
|
Crusty Conservative
|
If you crank it over with the ignition disabled, you should be able to raise some oil pressure at cranking speed. 10 to 20 lbs on the gauge, or a seperate external gauge if you have one.
Once you start it, pressure should be around 20lbs at idle. 60 or so as a regulated max - possibly higher, mine goes to about 80 when cold with Mobil 1 15W 50 on board. Do a search here for initial running in procedure - pretty important to do it right the first 30 minutes or so on a fresh set of rings & bearings..
__________________
Bill 69 911 T Targa, 2.4E w/carbs (1985-2001) 70 911 S Coupe, 2nd owner (1989- 2015) 73 911 T Targa, 3.2 Motronic (2001- ) |
||
|
11-09-2005, 07:23 AM
|
|
1970 Porsche 911S 2.2l MFI
