![]() |
Help get a new race track started!
John Condren is working on getting Riverside Motorsports Park built here in California. They need our help with contacting the officials below as to why it is so important to build it. Hope you can all help!
"To all the Friends of Riverside Motorsports Park - I am pleased to announce that on Friday, 4 November, the Merced County Planning Department released our project's Environmental Impact Report (EIR) for the required 45-day public review and comment period. Hardbound copies of the EIR are available from Merced County for $165 per copy (3,200 pages, including all appendices). Or, a CD-ROM is available from the County for free (one per person). Finally, the entire EIR is available in PDF-format on the County's website (http://web.co.merced.ca.us/planning/ceqareports.html) for review. (Please allow 6 days for uninterrupted reading.) I encourage all to write a support letter, fax or e-mail asking Merced County to approve the Riverside Motorsports Park project. Letters need not be long or detailed; however, the identification of one or more key benefits of the project with each letter, fax or e-mail would make for stronger support. Sample letters can be accessed or reviewed on the RMP website (www.RMPracing.com). Contact information for the two responsible officials is: Merced County Board of Supervisors Mr. Jerry O’Banion, Chairman Merced County Board of Supervisors 2222 M Street – Third Floor Merced, CA 95340 e-mail: dist5@co.merced.ca.us Fax: (209) 726-7977 And… Merced County Planning Commission Mr. Steve Sloan, Chairman Merced County Planning Commission 2222 M Street – Second Floor Merced, CA 95340 e-mail: klewallen@co.merced.ca.us Fax: (209) 726-1710 All the best - John Condren CEO" |
Make sure you post this in the race / ax section as well. I will see that the local PCA gets it and gets our members going as well. Nuts what it takes these days to be able to pave a bit of central valley middle of nowhere!
George |
especially when its about the poorest value dirt around!
Thanks for the help George- we need all the assistance we can get |
All times are GMT -8. The time now is 03:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website