H4/bucket installation question
 

Well, Got everything painted & put the left/passenger side on with no problems. Now to the drivers side. I put it on & it seems to be a bit askew. After looking at the H4 assembly & bucket in the fender I realized that the bucket on the fender is about an 1/2 inch off center. I know it's not the end of the world but it will drive me crazy to have that light skewed 1/2". Anyhew, there is a single bolt in the bucket. Is this the only screw holding the bucket in place?

bbt

I'm afraid not - the headlamp bucket is welded into the fender.