Proper height for stock 1968 912
 

Hi folks-

I just purchased a 1968 912 which was lowered way too much (the sump bottoms out when I leave the driveway).

What is the stock height from the center of the wheel to the wheelwell? I'm guessing it needs to be raised about 2 1/2 to 3 inches on the torsion bars, but would like to be accurate.

Please advise.

Thanks!

The stock Euro ride height is 25" in the front and 24.5" in the rear measuring from the ground to the bottom of the fender lip. I set my '68 911 like this and am very happy with it.

http://forums.pelicanparts.com/uploa...1144809427.jpg

Thanks, 911K...beautiful car btw...