|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2005
Location: coastal north caroilna
Posts: 7
|
electric seats
can the switches be removed/worked on or replaced without taking the seat out on a 1986 911 - carrera?
|
||
12-22-2005, 04:06 PM
|
|
|
Registered
|
I've done it to mine. Apparently, the contacts burn... I cleaned mine and I am guessing they burned again and lost good contact.
Watch-out! There is a little b-b ball in these switches that tend to either go flying or drop out when you pull the switches apart. Good luck.
__________________
Nick '85 Carrera |
||
|
12-22-2005, 06:07 PM
|
|
|
Registered
|
Hmm, this might answer my problem...I can't get my seat to go up in the front at the moment...
-T
__________________
86 Carrera Coupe (sold) 11 Nissan Leaf 03 Honda Civic Hybrid 91 ELECTRIC Kawasaki ZX-11 |
||
|
05-02-2006, 10:17 PM
|
|
|
Registered
Join Date: Aug 2002
Location: Galivants Ferry, SC
Posts: 10,550
|
I did this...but still needed to remove the socket head cap screws so the seat can "tilt" on its sliders in-place. Seat was not removed from car.
This gave better access to the connections below...I actually completely replaced the switch instead of trying to fix the switch. Wil
__________________
Wil Ferch 85 Carrera ( gone, but not forgotten ) |
||
|
05-03-2006, 05:33 AM
|
|
Porsche
