|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2002
Location: Atlanta
Posts: 273
|
Spring plate nut size?
Anyone know what size the large nuts on a stock spring plate are? These are on the bolts closest to the torion bar.
Trying to remove the assembly and mine are locked solid, so I need to get an impact socket to get them off. My largest socket is 22mm so I know I need more than that.
__________________
Mark H Class Race Car Project Old flames: 1999 C2 Race Car #78; 1983 SC Race Car; #78; 1990 C2; 1978 SC Race Car #78; 1988 Carrera; 1977 911S |
||
07-21-2006, 04:15 AM
|
|
|
Registered
|
24 mm if I remember correctly, 99% certain.
__________________
Magnus 911 Silver Targa -77, 3.2 -84 with custom ITBs and EFI. 911T Coupe -69, 3.6, G50, "RSR", track day. 924 -79 Rat Rod EFI/Turbo 375whp@1.85bar. 931 -79 under total restoration. |
||
|
07-21-2006, 05:32 AM
|
|
|
Registered
|
Whenever in doubt...Measure it!
Cheapie digital calipers that switch from ins to mm with the push of a button, will probably set you back a full $10
__________________
If it flows, it goes. If its smooth, it moves. Any questions? 96 993 C2 (Current) 87 911 Factory Turbo-Look Cab (Sold) 85 911 Factory Turbo-Look Targa (Gone) |
||
|
07-21-2006, 05:42 AM
|
|
|
Registered
Join Date: Oct 2002
Location: Atlanta
Posts: 273
|
Thanks guys. I'm at work, which is next to a craftsman store, and I forgot to meaure last night.
__________________
Mark H Class Race Car Project Old flames: 1999 C2 Race Car #78; 1983 SC Race Car; #78; 1990 C2; 1978 SC Race Car #78; 1988 Carrera; 1977 911S |
||
|
07-21-2006, 06:30 AM
|
|
1977 Porsche 911 Targa 2.7s
1987 Porsche 911 3.2
