|
|
|
|
| Author |
|
|
Guest
Posts: n/a
|
MFI and cams
Hi guys, I was wondering if anyone had heard of anyone putting a diferent cam in an MFI engine specificaly replacing an "S" cam with a GE 40.
Thanks for your input in advance. Bruce |
||
03-05-2000, 05:47 PM
|
|
|
Guest
Posts: n/a
|
The GE 40 cam specs are very close to the 'S' cam, with slightly less duration and a little more lift, and Bruce Anderson says they are interchangeable for performance applications of the 3.0 and 3.2 liter engines, but he does not specifically address your question directly. Therefore I suggest you contact him by email at: bruce1485@aol.com. Or, you may want to check with Jerry Woods Enterprises, because he was there at Garretson Enterprises when those cams were developed.
------------------ Warren Hall 1973 911S Targa |
||
|
03-05-2000, 08:27 PM
|
|
