930 lexan windshield install with 964 windshield gasket

[briankeithsmith]

Gang:

I purchased a Lexan windshield for my 930. Stock size.
Looks like it matches the stock windhshield in size very nicely.

However, I ordered a 964 gasket without the window trim.

This isn't going to work is it? I have the gasket around the glass, but the seal just doesn't look wide enough.

Do I need to order a stock 930 windshield seal?

Based on other posts I read, looks like that is what I need to do. I would return the Lexan and get a C2 windshield, however, I've already had tearoffs installed, and a tint banner installed on the lexan on the inside.

Thanks,

Brian

[ZLP]

The 964 windshield is slightly bigger than the 930's thats why the gasket is not wide enough for your 930. You either need to buy a 964 sized shield or get a 930 stock gasket.

[briankeithsmith]

That's what I thought. It didn't look like it was going to work.

Thanks ZLP.

My best plan at this point is to get a stock 930 gasket, since I've got my windhshield prepped with the tearoffs and tint.

Thanks again,

Brian