|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2006
Location: Berlin,MA
Posts: 1
|
1980 911 targa Cold Start Valve Installation
I need to install a cold start valve in my 1980 911 Targa and I have lost (mis-placed) my manual and I refuse to buy another one.
Does anyone have any instructions or know where I can go to download the instructions (even if I have to pay for the download)and any related info on replacing the cold start valve. Many thanks, Mark |
||
12-04-2006, 10:22 AM
|
|
|
Registered
Join Date: Dec 2004
Location: Novato, CA
Posts: 3,064
|
Do a search on here for info. The replacement itself is not difficult, but getting access to the part with the engine in the car is a nightmare. You'll need either a third elbow, extremely small hands, or a partial engine drop to do this successfully. Physically the part is located on the front (front is front) side of the throttle body. You'll be able to see it with a mirror. Good luck,
ianc
__________________
BMW 135i. Nice. Fast. But no 911... "I will tell you there is a big difference between driving money and driving blood, sweat and tears." - PorscheGuy79 |
||
|
12-04-2006, 01:58 PM
|
|
