Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Dumb Question Regarding Heads (http://forums.pelicanparts.com/porsche-911-technical-forum/322301-dumb-question-regarding-heads.html)

Laneco 12-30-2006 06:45 AM

Dumb Question Regarding Heads
 
Why do 911 engines have one head for each cylinder as opposed to one head for each bank like type 1, type 4 etc?

angela

dfink 12-30-2006 09:02 AM

One head for each cylinder. Three heads on each side connected together with the cam housing. The individual head don't become apparent until the cam housing is removed.

dfink 12-30-2006 09:05 AM

Sorry didn't see the why. I would think that it is if one goes bad you don't have to replace all. I suppose it could be done with one large head. Also if cylinder heights are off just a bit the individual heads can compensate. One large head and all the cylinder heights would have to be perfect to seal. Probably though due to cost.... Just my opinion.

dfink 12-30-2006 09:07 AM

One more time... It would also be difficult to cast a single piece head and provide the cooling fins... OK I'm done guessing now.


All times are GMT -8. The time now is 01:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.