Video of my engine!
 

OK, a shameless posting of my new engine warming up. I have already completed the 20-minute warm-up sequence from Wayne's book, this is a subsequent warm-up to do some troubleshooting (Innovate LC-1 is not sending showing up on the ECU monitor or the Innovate monitor) and just because I wanted to hear it again.

If anyone has had a similar problem with an LC-1 and can help troubleshoot...

Configuration is as follows:
3.0 case
10.2:1 JE Pistons
Boat-tailed
83 SC heads port matched to 3.2 intake
Heads twin-plugged and 2XEdis-6 coils to be activated once basic tuning is completed)
Clewett wires
GE20 cams
Ignition trigger off crank sensor (EDIS 36-1)
MSD 6T box
Blaster 2 coil
Adaptronic ECU Fuel and Ignition management
26# Accell injectors
K&N Intake adapted from Cummins Diesel 7.4L kit
Flowmaster muffler
Bursch headers
Fabricated Aluminum catch can & breather
Innovate LC-1 wideband EGO

Ignore the tube coming off the oil breather, I haven't installed the catch can yet and I overfilled the oil a bit.

Thanks all to those who helped along the way, esp Wayne, John Dougherty, CStreit, Mike Bonkalski, Bill V, Jack O, both of the Steve W's, dadofour and everyone else who chimed in.

Here it is: http://www.youtube.com/watch?v=3FCE6q7Q_P8

http://forums.pelicanparts.com/uploa...1169291953.jpg

Cool music...and very clean compartment...have fun now lucky guy...!

The car looks and sounds great. Any more pictures?

Thanks guys. Here are some more pics from another thread.

Back from Paint



9elf, where are you?

I'm in Brizvegas.

Tracking your car at Eastern Creek?

Yep, as soon as tuning is done! To the dyno next weekend. Where's brizvegas? Would I have seen you around at any PCNSW meetings in Willoughby?

Sorry mate. Brisbane.

I believe there is talk of an interstate track day at Eastern Creek this year between the PCNSW, PC Queensland and PC Victoria.

If so I hope to see you there.

I think you're right. Believe we have challenged Vic BMW club also!