Pelican Parts Forums - M/C - who has had a master cyl. fail(ing), and what was it like?

Pelican Parts Forums (http://forums.pelicanparts.com/)

- Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)

- - M/C - who has had a master cyl. fail(ing), and what was it like? (http://forums.pelicanparts.com/porsche-911-technical-forum/344084-m-c-who-has-had-master-cyl-fail-ing-what-like.html)

Craig, I THINK it's a Pelican pad, probably a street Pagid. Plenty of material left. S fronts, stock M rears stainless lines. Calipers were rebuilt just before I got them this past fall.

I am probably going to have the discs trued to be sure it's not that.

Similar to this one

Quote:

Originally posted by Christien
If there's any leakage, you'll be able to smell it. As has been said above, dripping into the footwell and onto the garage floor. Although when mine was leaking there was no appreciable brake pedal pressure loss. Of course, I didn't put that to the test, and got it replaced pretty quickly.

Mine was similar except I wasn't aware of it until I got in the car in the morning to go to the office and there was no pedal at all! My sniffer must not be working too well.

Put the car back in the garage and ordered a new MC. Planning to install it today. I'll have some questions so look for my thread, please.