| m_wuebben |
05-04-2007 07:23 AM |
Help reinstalling new alternator wires (long).
I have done a search on the board. Still need help. I am installing a new Valeo alternator that I got from our host here. I removed a Paris Rhone internal regulator alternator, so the update was already done. I labeled the wires while removing, but while I was installing, the ground wire from the block broke. Long story short, my tape came off the wires. I have a green (know where that goes), the ground (know), but the three wires into the one Stakon and the blue I don't know. I have the terminal ID from the new alt. Which term does the blue go on, T or X. How about the three reds, T or Y? Please Help!! Cheers, Mike
|
