Surgery on my rear-end.

[Jim_Amsterdam]

Hi Guys,
I'm (still) converting this old dog to an S/T inspired lightweight.
So far the front is carbon-fiber, and the car is as bare naked as can be.
The wheels are 9x15 and 8x15's, and the flares are moulded from an S/T.

So I had the flares lying around, a day off work, the sun was shining, and suddenly the impulse to rip 'er open. The flares where then bonded and bolted to the body. The bolt-heads were later ground-off and the shaft fiber-glassed in place. A layer of bondo, lots of sanding and primer ahead. But the arch feels really solid.

Other photos you can find on my website:
www.quickanddirtyinternational.com/














...

[Jim_Amsterdam]

[Dutchie]

Great job Jim ! what did you use to bond the fiber to the metal ?