|
|
|
|
|
|
Registered
Join Date: May 2007
Location: Arizona
Posts: 232
|
pin-out for 14 pin connector 78' SC
does anyone have the pin-out for the 14 pin connector on a 1978 SC?
|
||
|
|
|
|
Registered
Join Date: May 2007
Location: Arizona
Posts: 232
|
anyone?
|
||
|
|
|
|
Stranger on the Internet
Join Date: Apr 2004
Location: Bradenton, FL
Posts: 3,244
|
I have a partial drawing that I made. I'll try to get a picture of it posted in a bit. You have to consider that my engine compartment wiring was bastardized some PO ago.
These pin out's are hard to find. What specifically are you trying to trace/find? Pat
__________________
Patrick E. Keefe 78 SC |
||
|
|
|
|
Registered
Join Date: May 2007
Location: Arizona
Posts: 232
|
specifically I'm looking for the gauge sending unit signal wires from the engine to the gauges. I'm looking for oil temp, oil press, oil tank level, and the dummy lights.
|
||
|
|
|
|
Stranger on the Internet
Join Date: Apr 2004
Location: Bradenton, FL
Posts: 3,244
|
This is all I had. Maybe others will have some insight, and we can get a comprehensive 14 pin connector diagram through colaboration.
__________________
Patrick E. Keefe 78 SC |
||
|
|
|
|
Registered
Join Date: May 2007
Location: Arizona
Posts: 232
|
with all of the 3.6 conversion that have been done, I'm suprised that this is so hard to find. Someone has got to have this info
|
||
|
|
|
|
|
SCWDP- Shock and Awe Dept
|
__________________
Ryan Williams, SCWDP '81 911SC Targa 3.6 '81 911SC Coupe 3.2 #811 '64 VW Camper Bus, lil' Blue |
||
|
|
|
|
Stranger on the Internet
Join Date: Apr 2004
Location: Bradenton, FL
Posts: 3,244
|
Good job, Ryan. Did you complie this yourself?
Pat
__________________
Patrick E. Keefe 78 SC |
||
|
|
|
|
Registered
Join Date: May 2007
Location: Arizona
Posts: 232
|
![]() ![]() that's it. Thanks a TON!!!!!!! |
||
|
|
|