Updating to Turbo TieRods - Alignment
 

Im considering changing my tie rods to the Turbo Tie rods on my 71 due to much slack in the steering. Im wondering about getting it re aligned.

where / who has the Specs so I can give to my alignment shop after installed?

Most people don't want the factory settings.
Fender lip to ground 25" front and 24.5" rear is popular.
Do you have the bump steer spacers under the front rack?
Camber front 1deg negative and 1.5deg negative rear with Toe-in total 1/8" front and 0 rear is good for mildly aggressive street driving.

I dont have the bump steer spacers.., and I havent lowered the car Yet.

I know the front is easy to lower, but for the rear I will need to turn the bars 1 spline or so

Why not ask for a lead to a good independent alignment and corner balance shop who specializes in P-cars?