Front Turn Signal Wiring

[jeffrey2]

Okay - I'm a dunce. Removed front bumper, bellows and valence.

tried to snap some dig pix of the wiring before I removed and have since learned the camera wasn't working properly.

long/short, does anybody have the wire color coding for the parking, turn signals and fogs; and where they go?

Huge favor to ask, but I hope someone has a diagram or a pic they can share instgead of me spending about 2-3 hrs trying to figure it out the hard way.

Thanks !

[2Utes]

Here is a photo of a new turn signal assembly (purchased from our host) to show the wire connections to the housing. It is being installed on the passenger side.

The old wire has different wire colors. I have connected the wires as follows:
YEL/GRN wire of the new fixture to the BLK/RED in the headlight bucket.
BLU wire of the new fixture to the BLK?GRN in the headlight bucket.
The 2 unconnected female connectors are a pain to connect to the male connectors mounted on the housing and power the parking light.

Good luck.

[Danny_Ocean]

Originally Posted by 2Utes

The 2 unconnected female connectors are a pain to connect to the male connectors mounted on the housing and power the parking light.

You can make short (2" ~ 3") extensions for these, then heat-shrink the connections. Makes it easier to re-connect.

[jeffrey2]

Thanks Jeff & Danny; you made my life alot easier...