![]() |
|
|
|
Registered
Join Date: Mar 2005
Location: Northern CA
Posts: 4,703
|
someone had schnoor washers 4sale
On one of the cv threads... I can't find it now someone had a leftover bag of cv bolt schnoor washers.. I want to be green and not have them thrown out.. I hope Wayne doesn't mind too much... I have an 89 3.2 car and I'm guessing the bolts are 10mm. but not sure.. does someone know?
|
||
![]() |
|
Registered
Join Date: Jan 2003
Location: Langley,B.C.
Posts: 11,991
|
bluesideup had them!
__________________
Turn3 Autosport- Full Service and Race Prep www.turn3autosport.com 997 S 4.0, Cayman S 3.8, Cayenne Turbo, Macan Turbo, 69 911, Mini R53 JCW , RADICAL SR3 |
||
![]() |
|
Less brakes, more gas!
|
I bought them... sorry
![]() -Michael
__________________
![]() ![]() '82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah '13 Cayenne GTS |
||
![]() |
|
Registered
|
I can look I had a ton when I bought a box of them a year ago
__________________
Ben 89 944,85.5 944 914-6 2.4s GT tribute. 914-6werkshop.com |
||
![]() |
|
Porsche 911 SC, SAAB SPG
Join Date: Sep 2007
Location: Charlotte, NC
Posts: 308
|
I bought some from McMaster.com. The bag was labelled Schnorr.
$9.25 for 100 black steel or $13.00 for 25 Stainless Steel.
__________________
Jeff C |
||
![]() |
|
Registered
Join Date: Dec 2004
Location: Selinsgrove, PA
Posts: 239
|
I have some also.
__________________
Tut '87 Carrera coupe '08 BMW 535 xiT |
||
![]() |
|
![]() |
Registered
Join Date: Mar 2005
Location: Northern CA
Posts: 4,703
|
I don't know if you've been reading my cv and rear bearing travails.. not going well today.. I might have taken out a rear bearing that was good...
anyway on my car 89 3.2 there is no sign of any type of washer and none shown in Pelican... so I guess I don't need them. The bolts are 9.9mm and allen head and they go against the 1/4 moon plates... that's it. The car has run track days and AX/etc. for 7 years and no issues with coming loose... sorry for the false alarm... |
||
![]() |
|
coolcavaracing.com
|
Quote:
![]()
__________________
Pål (Paul) - The Norwegian lost in Finland... 1978 911SC 3.6 | 2001 Boxster S Racing Car | 1966 912 based 911 RSR replica racing car (for sale!) come and follow the Porsche Sports Cup racing fun and me at www.facebook.com/coolcavaracing ![]() |
||
![]() |
|
Registered
Join Date: Mar 2005
Location: Northern CA
Posts: 4,703
|
kroggers.. what I did was put dabs of paint where the bolt heads come against the 1/4 moon plates. Then I checked from time to time to be sure the bolts were not moving... I think the design idea is that the friction between the flange and cv face is supposed to take the load. All the bolts do is supply the required normal force. This is why you want the flanges clean and free of any burrs. I use a stone and go over them before mating. I would say the schnoor washers are not needed.. but they could help... I don't know, they would have to bight into the bottom of the bolt head and moon plates I think to do a lot of good.
|
||
![]() |
|
Registered
Join Date: Oct 2006
Location: MYR S.C.
Posts: 17,321
|
try fastenal. they have the washers and the bolts. you can get a bag of 50 for the price of what most sell 12 for. plus, you can specify the length, i bought some so the threads just made it all the way through the holes in the flange.
__________________
86 930 94kmiles [_ ![]() 88 BMW 325is 200K+ SOLD 03 BMW 330CI 220K:: [_ ![]() 01 suburban 330K:: [_ ![]() RACE CAR:: sold |
||
![]() |
|
Wildman Emeritus
Join Date: Feb 2003
Location: Chitown Burbs
Posts: 1,873
|
I am curious as well. My 80 had neither moon plates nor Schnoors and the bolts were just tightened against the cv joint. Am I the victim of a P.O. bad project?
Do I nee to be ordering some of each?
__________________
Mike Andrew 1980 SCWDP 2024 Suby Forester 2018 BMW X1- Wife's 2000 Boxter - Sold |
||
![]() |
|