|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2003
Posts: 231
|
hose length
Does anyone remember how many feet of hose they ordered to install a front-center bumper mounted oil cooler with inlet and outlet on right side?Thanks,T.C.
|
||
06-25-2008, 11:18 AM
|
|
|
porsher
|
Obviously, it depends on the routing.
I used about 17' to replace the hard lines for a stock (85 Carrera) cooler in the front PS fender well. This is pretty much useless data for you....However, here's an idea. I found that the hose (12AN) would not route out of the thermostat and along the rocker without kinking. So I purchased 90deg hose ends and it they worked great. |
||
|
06-26-2008, 11:37 AM
|
|
|
Registered
Join Date: Jul 2000
Location: So. Calif.
Posts: 19,910
|
Using the factory '74-on hard lines, about 5' of -12AN hose, (2) straight, (2) 45º swivel fittings and (2) AN-to-metric adapters.
I suggest using the factory or equiv. hard lines up to the front. They're not that difficult to find and routing and connection to the system will be easier. Sherwood |
||
|
06-26-2008, 01:28 PM
|
|
