Happy New Year. Man, Id love a P&C cool conversation piece. Let me know cost. Thanks

I'd love to have one next to one of my 'Vair jugs for a bookend. Let me know shipping cost, OK?SmileWavy

There are several 98mm cylinders. It will take some time to see if there is a matched set that is usable. There is one complete set of pistons and cylinders, but I don't remember if they are 95mm or 98mm.

I've always wanted to build a Porsche engine table. You know a glass topped table. Find a crappy engine case and it sounds like you have the parts to do so. I might be interested in 6 to do just that.

Thanks for the offer ... please put me down for a cylinder.

I'll clean it up and then figure out where to display it :)

Back when I used to smoke I had several beetle piston ashtrays. They wrist pin holes make good cigarette holders. The cigarettes taste odd after the cherry contacts the aluminium ...

I also would love a piston and cylinder. Just let me know shipping when you get a chance. Thanks.

I am in, too.

I'd love a cylinder and a piston. Perfect desk accessories!

Let me know what you work out.

I would like one also.

If you still have any of them, I'll buy them off you as long as they are pretty cheap. I have an "art" use for them...

I also have an 'ART' use :) Let me know shipping on a couple of piston/cyl extras please.

Best regards,

Michael

It'd make a nice piece on my desk. Let us know the weight for shipping purposes...

Dantilla - where in the "soggy NW" are you located? I'm in Portland.

I'd love a cylinder, maybe a piston too. Let us know about shipping.

Count me in on a piston and cylinder if any are left. They don't have to be the same bore. Maybe a couple of rods too. Let us know how much you want for these and shipping costs.

Okay, guys-

There are over 100 cylinders. The most popular bore is 90mm, with CIS style pistons. That means a good chunk of these came from our favorite 1974-1977 era 2.7. What a suprise!

Shipping will be a bit more than I thought. Looks like a cylinder, shipped to your door, will be $20. If you want both a piston and cylinder, $25.

Here is a 95mm:

http://forums.pelicanparts.com/uploa...1230942343.jpg

I have a few 97mm from the 3.3 turbo:

http://forums.pelicanparts.com/uploa...1230942446.jpg

Here are a few of the 90mm. I'll knock the carbon off with a Scotch Bright pad before shipping:

http://forums.pelicanparts.com/uploa...1230942559.jpg

I also have some 84mm iron cylinders, from a 2.4 "T", but since they were in a damp environment for a while, they have some surface rust. I may have a friend hit them in his sandblasting cabinet and see if they shine back up.

If you don't care about size, I'll probably send a 90mm. If you want something else, let me know.

I haven't used my PayPal account for quite a while. I need to go make sure everything is current (and that I remember the password!).

I've got some shipping boxes ready to go, so if I get $20 or $25 and a mailing address, I'll start shipping.

Let us know your PayPal info and a payment will be on the way!

OOPS!!

Just checked my Paypal account- It was still under an old email address that is no longer valid. I'll have to update that.....

Let me know too - I'll take a turbo P & C - make it $30 to include your time.