Disconnected vacuum hose--it's a mystery

[Cattler]

When I was installing a second engine hood shock this morning I found a disconnected vacuum hose. There is good vacuum and I'd like to reconnect it but I don't know where it should go and can't find an obvious connection point. Also, what is this hose for? I think it comes off the brake booster vacuum hose.

Here's a shot of the general area:



...and a close up of where it is connected:



And the photo of the car:



Thanks,
David

[kodioneill]

to the cruise servo possibly?

[john walker's workshop]

right next to that larger hose on the cruise servo.

[Cattler]

John--it connects to the cruise servo next to the large hose? I didn't see a connection point there and didn't see that hose in that place in the PET. Am I reading this incorrectly?

Here's the page from the PET:

[E Sully]

It's the smaller vac line in the photo.

[janz]

+1 on the cruise servo but its actually right behind the big hose, very hard to see with all the stuff in the way. Try to reach back there with yor finger and feel the small nip its goes over or perhaps one of those small angled mirrors will allow you to see the attaching tube.

[Cattler]

Thanks--the photo and comments helped. I don't know why I couldn't feel it before I had the photo of the cruise control servo in the box...

In any case, I got it reconnected!