|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2008
Posts: 73
|
Gas leak
I need some recommendations, my fuel distribution setup is leaking. At first I tried teflon tape which leaked badly (pictured below). Currently I'm using teflon based pipe thread sealant, which appeared to work fine, but in testing my car I noticed a milky drop from the bottom of the Y when the VDO gauge showed 3.5psi.
What do people with the PMO distribution blocks use. Maybe a form-a-gasket type sealant? 
Last edited by cmoanz; 07-24-2009 at 04:46 PM.. |
||
07-24-2009, 04:43 PM
|
|
|
Make My Day
Join Date: May 2003
Location: Northern NY
Posts: 1,305
|
Look here:
http://www.gasoila.com/products/pipethreadsealants.html or here: http://www.permatex.com/ Don't use teflon tape.
__________________
74 911S Targa ROW Building Designer/Business Owner |
||
|
07-25-2009, 05:46 AM
|
|
