|
|
|
|
| Author |
|
|
Guest
Posts: n/a
|
Are the nuts supposed to be different?
Check this out, is there something wrong with the following pictures. Are those sprockets supposed to be different? I was looking at Andersons' book and noted they should be the same. Any ideas? Thanks (again)
Adam   ------------------ atr911@hotmail.com |
||
02-07-2001, 12:42 PM
|
|
|
Guest
Posts: n/a
|
Adam,
Well, somebody used two different 'vintages' of cams in your engine! The right cam is a post-'80.5 cam and uses a 12 mm bolt to hold the sprocket, and the left one is a pre-'80.5 cam using the 46 mm nut. Does look a little odd, doesn't it? ------------------ Warren Hall 1973 911S Targa |
||
|
02-07-2001, 01:12 PM
|
|
