|
|
|
|
| Author |
|
|
Registered
|
Thermal Reactors
I finally got my thermal reactors off. Wow what a chore getting exhaust nuts off.
Inside thermal reactors is sleeves that fit 3/8" approx. up into exaust port. Do I need to keep the sleeves in place when using thermal reactor replacements? I bent two of the sleeves when I dropped the thermal reactor when removing. The only thing I can think they are for is to help with exhaust leaks at the gaskets. Any ideas?
__________________
1977 911S Targa 1967 Double Cab (2) 1962 23 window 1958 Single Cab 1964 Ruby Red Kombi 1964 Flipseat Westy |
||
03-12-2010, 05:10 AM
|
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
I used SSI thick flange that come with sleeves for an SC
those sleeves can't hurt
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
|
03-12-2010, 08:51 AM
|
|
