|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2000
Location: Clearwater, Florida
Posts: 71
|
wheel torque spec
Sounds pretty dumb, but is there a torque spec. for wheel lug nuts? Seems like you could strip the aluminum nuts rather easily.
Joe '80 SC Targa |
||
12-03-2001, 11:45 AM
|
|
|
Registered
|
most definitely is, but I don't have it here at office. I can check tonight if others don't chime in first.
__________________
Steve My '85 911 Targa ** Hand painted center caps for sale here RIP Warren PCA & Rennlist member |
||
|
12-03-2001, 11:51 AM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
94 ft-lbs but torque to 50 ft-lbs first then to 94. Tighten slowly, don't jerk torque wrench. Hand seat studs (never an air wrench), use an alternating (pass across wheel) pattern and a soft socket (aluminum or plastic lined steel).
 Jim
|
||
|
12-03-2001, 12:00 PM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
I meant hand seat nuts not studs.
 Jim
|
||
|
12-03-2001, 12:01 PM
|
|
1985 Porsche Targa 3.2
