|
|
|
|
| Author |
|
|
Registered
Join Date: May 2010
Posts: 1
|
78 SC "Hanging" on right side
Hi
I am a quite new Porsche owner to an 78 911 sc. This is my first Porsche and I love it. But there is one thing that comes to me in my BAD dreams and that is  : The car looks like it is a little lower on the right side than the left. I have checked the ride hight on the Torsion bar and the are pretty much the same hight. And still the car is "hanging", about one cm measured on the bumper. Do anyone have a theory. The history about the car says nothing about any collision damage or....regards Terje Norway |
||
05-16-2010, 05:50 AM
|
|
|
Registered
Join Date: Oct 2003
Location: Michigan
Posts: 14,093
|
It's probably been corner balanced properly. Get in the driver's seat and have a helper meaure how much that side lowers. I would be willing to bet the car sits about even.
 Most 911's sit slightly higher on the PS. It if drives and brakes straight, don;t worry about it. These cars are notorious for having fenders that are slightly "off" due to being somewhat handbuilt at the factory.
__________________
1981 911SC ROW SOLD - JULY 2015 Pacific Blue Wayne |
||
|
05-16-2010, 08:23 AM
|
|
