![]() |
|
|
|
Registered
Join Date: Sep 2008
Posts: 93
|
Opions on V e r t e x for top valve job / stud repair
Thinking about having v e r t e x replace broken studs and do a valve job on my SC. Thoughts on them or other recommendations?
|
||
![]() |
|
Busted!
Join Date: Apr 2009
Location: WaxhawNC
Posts: 374
|
That company is a mail order catalog/parts warehouse...they will farm out the work to a local shop. You could do the exact same thing and save the shipping cost. Post your location in the engine rebuilding forum and people there will recommend a good shop.
|
||
![]() |
|
Registered
Join Date: Sep 2008
Posts: 93
|
Thanks for the reply, I'm in Miami and ****** is right down the street from my house and close to public transport for me to drop off and pick up the car
|
||
![]() |
|
Registered
Join Date: Dec 2004
Location: South Florida
Posts: 102
|
****** is ok for picking up some parts, but you are better taking it to a shop that specializes in working on porsches not just the parts. Scott Finley in South Miami is very good, busy but great work.
__________________
1981 911 SC 7 & 9 Fuchs, monoballs, 22/27 t-bars, 19/22 swaybars, M&K dual in/ dual out |
||
![]() |
|
Registered
Join Date: Oct 2002
Location: St. Louis region
Posts: 3,147
|
Pretty sure you could do a lot better than Vxxxxx. I got a set of rebuilt calipers from them once and they were a complete joke - bad paint, bent bleed screws, etc. I wouldn't use them for anything, much less a job like this. Find a good shop and work with them directly.
__________________
Deceased: Black '88 Carrera Coupe, Steve Wong and Russell Berry chips, Dansk premuffler, custom MK GT3-style muffler, Magnecores. Al Reed 7 & 8 X 16 Fuchs. Full Elephant Racing suspension, 21/28 T-bars, Turbo tierods, bump steer kit, Bilstein Sports, BK strut bar. Ruf bumpers, 935 mirrors, Carrera 3.0 tail, DasSport bar. '11 BMW 328iX, '18 Nissan Frontier 4X4, '92 Acura NSX. |
||
![]() |
|
Registered
|
Call Scott or Mike Gokey at German Performance 954 772-6272,.
Spend some money on a cab if you need it, you will save money getting the job done right the first time.
__________________
Dan '86 911 Targa Driver '76 911 Targa 3.0 Track Toy 46mm PMOs, 10.5/1 J&E,Web Cams, Wide Body fenders, 23mm and 30mm Hollow T-Bars, 930 Sway bars, Bilstein Sport Shocks, Plastic Bushings (too damn squeeky) |
||
![]() |
|
![]() |