Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: May 2002
Location: Georgia
Posts: 3,156
How long do front struts last

I know...dumb question. I put inserts(Boge) in about 10 years ago/40k miles.
Car handles fine. I am rebuilding the front end and wondered if there was a definitive way to tell their condition. When I removed the strut assembly, they were fairly easy to compress to get the assembly out of the car but rebound quickly.

__________________
1986 3.2 Carrera
Old 01-07-2012, 10:27 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
?
 
Join Date: Apr 2002
Posts: 30,509
When I purchased mine years ago, she was a garage queen with 46K on the odometer. That was the first thing I did, original Boges > new Bilsteins...I couldn't believe the difference it made. If the Boges were easy to compress, then I think you may be in the same circumstance imo.

Last edited by KFC911; 01-07-2012 at 10:52 AM..
Old 01-07-2012, 10:45 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered User
 
Join Date: May 2011
Location: Vancouver, BC, Canada
Posts: 341
I had my Boge in since 1999 (3.2 Carrera) and about 31K miles. The car still felt "fine", but I replaced them with new Bilsteins HD, and it felt like a new car, so much better and worth every penny of it (under $300).
__________________
- 2014 Porsche Cayman - Guards Red/Black
- 1986 Porsche 911 Carrera 3.2 - Silver/Burgundy
- 1973 Porsche 911 2.7S - Aubergine/Black - 2200 lbs !
- 1980 Porsche 931 - Malaga Red/Black (sold)
- 2015 VW Golf 1.8 TSI
Old 01-07-2012, 01:34 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Mo money = mo parts
 
Join Date: Jul 2003
Location: Pittsburgh, PA
Posts: 1,198
Garage
40-50k are about all you can hope to achieve. I had an Audi TQ where the original Boge were totally shot at 50k. I think you answered your question, when you said the Boge were fairly easy to compress. Bilstein HD are far superior and no degradation in ride quality - stick with rubber bushings for OE ride.
__________________
Greg

86 Coupe (stock - pretty much like Butzi designed it) - gone, but not forgotten
65 Ducati Monza 250 & 66 Monza Junior (project)
"if you are lucky enough to own a Porsche, you are lucky enough"
Old 01-07-2012, 05:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Registered
 
dshepp806's Avatar
 
Join Date: Dec 2006
Location: Middle Georgia
Posts: 4,550
Garage
My recent BOGE changeouts (all around on the '89) yielded SUBSTANTIAL RESULTS!!!!!!!!!!!!!!! Keeping her stock....


Doyle
__________________
Recording Engineer, Administrator and Entrepeneur
Designer of Fine Studios, Tube Amplifier Guru
1989 Porsche 911 Carrera Coupe
25th Anniversary Special Edition
Middle Georgia
Old 01-07-2012, 06:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
?
 
Join Date: Apr 2002
Posts: 30,509
Quote:
Originally Posted by gregwils View Post
...Bilstein HD are far superior and no degradation in ride quality - stick with rubber bushings for OE ride.
I know this is a very subjective matter, but I went the other way and absolutely love my go-kart on rails. Bilstein HDs (front), Sports (rear), 22/29 T bars, polybronze bearings all around, monoballs, lowered, etc. (and also dropped a couple hundred lbs). We've got decent roads around here, so the ride quality isn't degraded at all imo (subjective like I said) and the handling...well, I'd do the exact same thing again in a heartbeat .
Old 01-07-2012, 07:57 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
a.k.a. G-man
 
Geronimo '74's Avatar
 
Join Date: Sep 2003
Posts: 13,614
I had my boges replaced with bilsteins.
The car had 120K miles on the original shocks.....
Haven't driven it with the Bilsteins yet bit I am sure it will be a lot different...

Old 01-08-2012, 01:02 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Reply


 


All times are GMT -8. The time now is 10:53 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.