2.7-3.2 swap elect harness ??

[jld]

I'm finishing up my engine swap and have come down to attaching the harness wires.
here is what I have found big red wire.....to battery
sm red wire.....???? {switched positive at fuse bx?]
black wire # 1.... from DME to tach
black wire #2.......??????
blk/violet...........DME to tach
red/yellow????
green/yellow?????
Wireing diag seems to indicate the rd/yel and grn/yel are for convertible top and seat belt indicators but that doesn't seem right.

Guys....I would APPRECIATE any help!!
thanks....jack

[Rich76_911s]

Jack,

I think most of your questions can be answered on Marc's website. Good luck with the install.
Index for Marc's 2.7 to 3.2 Conversion

Rich

[jld]

thanks Rich...I did a quick look at the info but didn't see harness hook-up [will look closer after work] I did notice that he said fuel pump needed to be replaced. I was told stock fuel pressure regulator would deal with original fuel pump pressure isue and 76 pump would work.j

[jld]

still need some help with the wires.
j

[ALEX P]

Hi Jack, I think one of the early photos in my thread may help - It was taken from another thread but I think it's relevant:

3.2 to 3.6 Wiring harness/DME Advice

[jld]

Thanks Alex!!....I think I have all I need on the wireing. One last question I have is about the fuel pumps and I'll start a new forum for that!!!
Thanks Pelicans!!