Quick steering rack question
 

Ok, I was just digging around under the front end of my car ('69 911T) draining a gas tank full of crud when I noticed the number on my rack.

It's from a 914, VW stampings and all.

A near future project is turbo tie rods (I already have the kit.) Am I going to have any problems?

Thanks

Dan

bump for someone who knows steering.

Any functional differences between 911 and 914 steering rack?

Thanks

If I remember right the 914 and early 911 had the same front suspension.

Pelican offers the same kit for both the 911 and 914.

+1

load in part number 901 347 010 02 and it will say superseded. to the 914 number.

Check page 263 of the 69 parts manual for original number.

http://www.porsche.com/all/media/pdf/originalparts/usa/911-1_USA_KATALOG.pdf

For one, 4 lug vs 5 lug for the 911. There may be other differences.

Sherwood

It sounds like it is unlikely to be a problem.

I'll post an update once the tie rods are on, let the community know how it goes.

Thanks for the help! SmileWavy

-Dan

This is an awesome link! Thanks a lot!

-Dan

You can burn some real time there. You can also access almost all the Porsche parts lists from this link.

Pelican Parts Porsche Parts Diagrams and Locator