|
|
|
|
| Author |
|
|
Koozy
|
Pressure plate ID question
I need to ID this pressure plate I have. Can't seem to find another one with these numbers. It has an aluminum disc with the steel plate sandwiched on it for the face.
Numbers on the inside are: 102 101 F&S 9 74 On the outside it says: typ m 215 SCHWEINFURT I know it was used with a 901 trans and a type 4 engine but should work the same for a 914/6 conversion. Anyone know what this is? I was thinking it was a early S but now think it's just a "sport". Is the "sport" aluminum? Looks like this: 
__________________
Mike Koozmin 1970 911 3.8 CF RSR - Polo Red 1974 914 GT - angry twin-plug 2.7 AX beast |
||
01-14-2011, 08:37 PM
|
|
|
Registered
Join Date: Feb 2000
Location: London, UK
Posts: 2,349
|
Sounds like a '69S pressure plate - can you post a picture of the other side ?
Incidentally, if it is the '69S version it will only work with the corresponding (thinner) driven plate (clutch disc) which is NLA ...
__________________
Andy M&W 904 ... now gone GT-style 356C ... also gone |
||
|
01-15-2011, 01:32 AM
|
|
|
Registered
Join Date: Aug 2001
Location: Tooele , Ut.
Posts: 428
|
Yes , If it is steel faced it is the one.
|
||
|
01-15-2011, 09:08 AM
|
|
|
Koozy
|
OK, got it. Thanks. Just making sure it wasn't a different PP that was made after the "S" to eliminate the need for a thinner disc. it indeed has a steel face.
__________________
Mike Koozmin 1970 911 3.8 CF RSR - Polo Red 1974 914 GT - angry twin-plug 2.7 AX beast |
||
|
01-15-2011, 09:15 AM
|
|
