No Spark!!!! HELP!!
 

I am trying to get my 80 SC running again and I am having a few problems.

I dont seem to be getting any power to my CD unit? There are two wires that arent connected and I was wondering need to be connected to.

Here is a description. In the loom coming from the CD unit on the drivers side of the engine compt. there are two wires, one red about 12 guage and a brown w/red stripe.

Mine are just exiting the loom and arent plugged in? HELP!!!!

I am not getting any spark so I checked for power at the coil, nadda. So I checked for power to the cd unit, no wires in the conector have power. There is a read wire in there that I suspect is the power lead and it is one of the wires in question. I removed the engine about 3 months ago and didnt label the wires ARGGG.

If anybody know please respond ASAP. I am tryig to get it running today.

Ben in SC

Ben,

Haven't you found Pelican's Electrical Diagrams, yet?


http://www.pelicanparts.com/911/911_...SC_Part1-2.jpg

------------------
Warren Hall
1973 911S Targa

I found it about 30 seconds after I posted this question...... It fired right up once I found the connector for the CDI....


Thanks anyways.

Ben in SC
Now running again!! http://www.pelicanparts.com/ultimate/smile.gif