|
|
|
|
| Author |
|
|
69 911S
Join Date: Jul 2011
Posts: 2
|
69 911S Ignition woes
Need a picture please - nothing in repair manual. Had a loose wire (CDS) on back of ignition switch. Finally got it fixed and darned if I didn't tap some metal sliding it back in dash. Of course, this pulled another wire loose and now can't be sure where it goes. Have already beat myself up for not disconnecting battery. Fix would have been done 3 hours ago had I done so. Now I'm stuck. Current loose wire is black and I think I know where it pulled out from but got to be sure. Extra point if you can advise the correct way to put these wires back in their place. Soldering the little metal plug back to the wire or do you pinch it on there? Thanks much - first post. Car has 190K with 20K on engine rebuild. Looking at professional restore on paint, interior and brakes over winter this year.
|
||
07-19-2011, 10:10 AM
|
|
|
Registered
|
What color wire is loose?
__________________
John '69 911E "It's a poor craftsman who blames their tools" -- Unknown "Any suspension -- no matter how poorly designed -- can be made to work reasonably well if you just stop it from moving." -- Colin Chapman |
||
|
07-19-2011, 01:04 PM
|
|
|
69 911S
Join Date: Jul 2011
Posts: 2
|
The one I repaired was yellow - one now unsure of is black. Looking at situation again with clearer head I do see now how to properly attach these wires.
|
||
|
07-19-2011, 04:24 PM
|
|
1969 Porsche 911E 2.0 E
