|
|
|
|
| Author |
|
|
Registered
Join Date: May 2004
Location: Ontario Canada
Posts: 53
|
door locks out of phase
Hi, the drivers door was changed and now there is a phasing problem with the door lock actuators. One side will lock while the other unlocks.It does not matter which door I am trying to lock. How do I get these things working together? I searched and found one thread where the poster said he had to phase his but did not say how. I have read the Bentley and can't find a reference there either. Any Ideas?
The car is an 87 930 Thanks Clarence
__________________
72 911T Euro 81 931 71 911E Euro rusty on the bottom 72 911T project RS look |
||
09-05-2011, 11:14 AM
|
|
|
76 911S Targa
Join Date: Oct 2010
Location: Idaho
Posts: 1,150
|
Isolate the wires to one door and apply 12V.
__________________
76 911S, 2.7, Bursch Thermal Reactor Replacements, Smog Pump Removed, Magnecors, Silicone Valve Cover Gaskets, 11 Blade Fan, Carrera Oil Cooler, Turbo Tie Rods. |
||
|
09-05-2011, 12:57 PM
|
|
|
Registered
Join Date: May 2004
Location: Ontario Canada
Posts: 53
|
Thanks I will do that
__________________
72 911T Euro 81 931 71 911E Euro rusty on the bottom 72 911T project RS look |
||
|
09-05-2011, 01:23 PM
|
|
