![]() |
|
|
|
Registered
|
22mm socket wrench in tool kit
What is it for? It's obviously too small for the 24mm alt/fan nut.
__________________
'80 RoW 911 SC non-sunroof coupe in Guards Red It's not a Carrera.... It's a Super Carrera! |
||
![]() |
|
Registered
|
What's a socket wrench?
__________________
1974 sahara beige 911 targa 1982 chiffon 911sc 1985 prussian blue metallic carrera |
||
![]() |
|
Walfluke Verehrer
|
__________________
John '85 911 Carrera Coupe |
||
![]() |
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,491
|
22mm is used on the earlier cars alternator that had the fine threads.
Bruce |
||
![]() |
|
Registered
|
Quote:
__________________
1974 sahara beige 911 targa 1982 chiffon 911sc 1985 prussian blue metallic carrera |
||
![]() |
|
Registered
|
Looks like the wheel lug wrench, only it's 22mm.
I'm guessing one of the PO replaced the original SC one with one from an earlier car then.
__________________
'80 RoW 911 SC non-sunroof coupe in Guards Red It's not a Carrera.... It's a Super Carrera! |
||
![]() |
|
![]() |
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,491
|
An 80 would still have the early alternator until it was updated to the Paris-Rhone which was about 82 the PR became standard.
Bruce |
||
![]() |
|
Registered
|
This must be the case then. There's no external VR where there should be one so PO must have replaced the early alternator with the later internal VR type. Thanks for the info!
__________________
'80 RoW 911 SC non-sunroof coupe in Guards Red It's not a Carrera.... It's a Super Carrera! |
||
![]() |
|