|
|
|
|
| Author |
|
|
Registered User
Join Date: Oct 2011
Posts: 29
|
doors do they fit?
Hi everybody i have a 1971 911T that needs two doors do the earlier SWB doors fit my car?
Thanks Pete |
||
10-13-2011, 12:19 AM
|
|
|
Registered
Join Date: Jul 2010
Location: Italy
Posts: 576
|
I'm 99% sure that will fit
|
||
|
10-13-2011, 04:54 AM
|
|
|
Registered
Join Date: Oct 1998
Location: Denver, CO
Posts: 1,335
|
I'm told they will (have a '67 door being dipped that's going on my '72).
__________________
- '72 911T - '81 911SC Euro |
||
|
10-13-2011, 05:28 AM
|
|
|
Registered
Join Date: Oct 2005
Location: Capistrano Beach, Ca.
Posts: 7,235
|
As stated by others, they will fit. However, be aware that you still may need a bit of tweaking to get the seams correct--something that's to be expected in hand assembled cars.
__________________
L.J. Recovering Porsche-holic Gave up trying to stay clean Stabilized on a Pelican I.V. drip |
||
|
10-13-2011, 07:24 AM
|
|
|
Almost Banned Once
Join Date: Feb 2009
Location: Adelaide South Australia
Posts: 38,478
|
They will fit but as mentioned above they will need work.
Back in the day they used to "adjust" the front door post (were the hinges bolt to the body, not the door) with a block of wood and hammer. It's even in the Haynes restoration manual. When I do this I take my time and touch up the bolts with some paint after everything is as it should be. But first things first. Make sure the door skin is flush with the body before adjusting the gaps and things will go a lot smoother.
__________________
- Peter |
||
|
10-13-2011, 07:53 AM
|
|
|
Registered User
Join Date: Oct 2011
Posts: 29
|
Thanks to everyone who responded i think that's answered my question.
Pete |
||
|
10-13-2011, 09:49 AM
|
|
|
