Any here have pictures/diagrams of the DME routing for a 3,2 Carrera?
 

As said any have pictures or diagrams of where the DME harness goes out to the engine and pictures/diagrams of the where the harness goes inside the car?
This is for a 1985 911 3,2 Carrera

Does this help?

1a
http://forums.pelicanparts.com/uploa...1326379305.gif

It helps but if any have pictures of exact where the harness is routed inside the car from the engine to under the seat and where it comes out in the engine bay that would be great

No pictures, but the harness starts at the ECU under the seat, and is routed under the carpet along the left side of the car to the rear seat area, where it goes through a large grommet and from there it turns upward behind the left rear seat up into the engine bay.

I am traveling for business but I will be back on Friday pm when I'll be able to take pictures of inside the car. My seats are out as I replacing soundproofing and carpet in my cab and the harness is right there.

zippy_gg Thats really great if you can do that:)

I will PM you my email adress

Thanks

Or if you put the pictures here? Anyway i have PM you my email adress

3.2 install help
 

Please click this link to see one of Weekend Rides 3.2 instalations.

Weekend Rides LLC. - 1977 Porsche 911 3.2 Engine Conversion

I'd like to add, once through cab behind left rear seat, it goes up in between the cab and the shock tower hugging the left side of the engine compartment.

I'm not sure if I'm allowed to post these, if not mod please delete.
http://forums.pelicanparts.com/uploa...1326417721.jpg

Roger, I e-mailed you these pics and a short video, but I wanted to post here as well as someone may need these some day.
As you know the DME is under the driver seat and the harness follow the driver side seat outer rail until it enter the engine compartment under the rear seat.
http://forums.pelicanparts.com/uploa...1326572454.jpg
http://forums.pelicanparts.com/uploa...1326572481.jpg
http://forums.pelicanparts.com/uploa...1326572501.jpg
http://forums.pelicanparts.com/uploa...1326572521.jpg

Alas there is no visibility as to where the harness enters the engine compartment, but some who has/had the engine out my be able to post what you need.