|
|
|
|
|
|
Registered
|
More on Euro pre-mufflers...
I finally got around to installing the Euro-Pre Muffler on my car. For those new to my endeavors here's the synopsis:
3.2 w/ GHL single in, dual out and bypass pipe. I found an old style Euro-PM and had an O2 bung welded in. I was curious about the power debate and the bypass pipe vs/ Euro-PM. Sound- The car is now a little quieter. The Euro-PM and GHL work together to give an aggressive sound that's not ear splitting. The bypass pipe and GHL were a bit "raw" for me. I definately like the current setup better. Power- There seems to be a bit more low end torque now, but the seat-o-the-pants meter is unsure about top end or overall. Damned if I can really tell the difference... Overall I'm happy. The reduction in noise was well worth the minor amount of $$ I spent. Here's the before.
__________________
Dan Tolley 1987 911 Coupe The Owner's Gallery 2006 Audi A4 3.0q Cabriolet 2003 Ford F-150 XL Lumber and Trash Hauler. |
||
|
|
|
|
Registered
|
Here's just the Euro pre-muffler before install.
__________________
Dan Tolley 1987 911 Coupe The Owner's Gallery 2006 Audi A4 3.0q Cabriolet 2003 Ford F-150 XL Lumber and Trash Hauler. |
||
|
|
|
|
Registered
|
and after install...
__________________
Dan Tolley 1987 911 Coupe The Owner's Gallery 2006 Audi A4 3.0q Cabriolet 2003 Ford F-150 XL Lumber and Trash Hauler. |
||
|
|
|
|
Registered
|
Sure looks nice, I'll say that. Maybe you can drive around with 3 wheels for a while just to show it off!
__________________
-kb- |
||
|
|
|
|
Registered
|
I'll leave the 3 wheeled driving to Jack!
__________________
Dan Tolley 1987 911 Coupe The Owner's Gallery 2006 Audi A4 3.0q Cabriolet 2003 Ford F-150 XL Lumber and Trash Hauler. |
||
|
|
|
|
Registered
Join Date: Nov 2000
Location: Ashburn VA.
Posts: 667
|
Boy that pipe looks great.
Where did you get your Pre muffler and how much? Thanks. GB83SC |
||
|
|
|
|
Not Quite Banned
Join Date: Dec 1999
Location: Ft. Lauderdale
Posts: 1,223
|
Dan, how does this pre-muffler compare to the ss models from Fab Speed? I bought one and installed it in place of my bypass pipe and immediately liked the new sound (Bursch muffler).
__________________
Thomas Owen 1972 911T 1972 911S |
||
|
|
|
|
Registered
|
The pre-muffler is from a '79 Euro SC (my first SC part). I had an O2 bung welded in, removed all the rust, sanded to bare metal, and then painted with aluminized manifold paint from Eastwood. Grand total : $90
I'd have to assume that the Fabspeed SS pre-muffler is based on the same idea; a free flowing pipe with some sound removing baffles (just a bit more $$$).
__________________
Dan Tolley 1987 911 Coupe The Owner's Gallery 2006 Audi A4 3.0q Cabriolet 2003 Ford F-150 XL Lumber and Trash Hauler. |
||
|
|
|