Looking for help to identify pertinent models for a workshop manual
 

Hello wonderful folks of Pelican Parts,

I have 2 large workshop binders that I am having troubles pinpointing a model to.
Any chance you sharper folks can assist in identifying which model 911 this is from my pictures?

I shall forever be in debt!
:D

http://i.imgur.com/a0C8Cl.jpg
http://i.imgur.com/aeoCMl.jpg
http://i.imgur.com/FHlBNl.jpg
http://i.imgur.com/ESe4sl.jpg
http://i.imgur.com/y6G3Kl.jpg
http://i.imgur.com/TcrPfl.jpg
http://i.imgur.com/nmLEjl.jpg
http://i.imgur.com/uuNRel.jpg
http://i.imgur.com/DWpiAl.jpg

Looks to be lates 60's. 2.0 litre engine and the 901 code point to the earliest cars (1964-69). However, the T, E and S did not come out until 1969. Prior to that there was the 911, 911L and 911S in 1968 and just the 911 and 911S prior to 68. Maybe someone can verify or correct me.

BMWWW,

Those are Vol. I and Vol. II of the 911 Workshop Manual.
These two volumes cover the 911 (and 912) from ’64 through ‘67 and should have the supplement pages covering ’68 through ’71. The supplement page numbers are preceded by the letter “S” (e.g. page E7 vs. SE9 for the engine supplements).

These should be in two burgundy 4-ring loose-leaf binders.

Best,
Grady