Rear RSR trailing arm pivot adjuster needed..and JohnJamesRacing defuncted?
 

I acquired a 911 chassis that has the now defuncted Smart Racing rear pivot/camber box welded on, but I did not get the adjuster. I called Jerry Woods, and they do not carry the part anymore, but Rich's voice mail to me (cut out midway) leads me to believe they sourced the camber boxes from JohnJamesRacing (Jim Hendrix). I could be wrong and I've not been able to talk to anyone at JWE since I got Rich to leave me a voice mail.

Anyhow, I called the number on JohnJames's web page and it is disconnected. I sent an e-mail to Jim Hendrix a while back and I didn't get anythign, but now get spam from that account.

What gives?

Yes, I can probably make the part, but I don't have time to fuss with it.

Any help guys? Seems the old Porsche parts market is suffering a large gap!

Call Ira at Tarett:

Rear Control Arm Camber Box Pr

Thanks, Cory.

I was able to get a hold of Sean at John James Racing, and I think I've got the adjuster covered. Now working with ground Control on a camber plate.