Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
1988 Porsche 944 Turbo S
 
Bmangler88's Avatar
 
Join Date: Aug 2009
Location: Lewisville TX
Posts: 28
The VRL 911 Race Car Project

Hello everyone-
I just started the next big project and I wanted to document the progress here. It's a 1977 Porsche 911S that will be stripped down and rebuilt into the Vintage Racing League Race Car. I went and picked up the car on Oct. 28 and trailered it over to my dads house in Lewisvillle where we have a lift to help with the engine and transmission removal. This will be my first race car build, so any knowledge, tips, tricks, advice, etc. would be greatly appreciated.








I took the better part of an afternoon to get the 2.7 liter engine out but we finally got it on the ground just after dark as you can see in the picture below. After doing some research and looking at some other 911 builds I have decided that I want to put a 3.0 liter motor in the car and find a buyer for the 2.7 liter. I'm kinda going for the Carrera 3.0 mock up.




The next job is the gear box. I know it is possible to remove the engine and transmission together but it really just didn't work out that way so they got separated in the process. Now that the engine an transmission are out I will be transporting the car over to my garage in Southlake/Keller where I will begin stripping the car down and preparing it for a roll cage.






Well, I got the car over to my garage and began stripping the interior out. If anyone is restoring an older 911 and needs some missing interior parts, I have plenty of various interior parts and pieces that I would like to sell to help offset the cost of this build. Some of the things were unsalvageable and were thrown out but there are plenty of good authentic Porsche OEM parts that are in great condition. Just PM me and I will let you know what I have and send some pictures.
I am starting to think about my options for a roll cage and thinking that a welded in roll cage would be far superior to a bolt in cage as far as safety standards go. The weld in cages also meet the safety requirements of more racing clubs and associations opening more options as to what events we can participate in with the car. I will be able to do more research on the subject over the holidays. Any suggestions are welcome.
More updates and pictures coming as progress is made.


__________________
88 Porsche 944 Turbo S
07 Honda CRF 250X
00 Honda RC51 RVT
96 GMC Sierra Z71
Old 12-16-2012, 07:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 06:25 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.