|
|
|
|
| Author |
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
Bolt size for the screw socket from WUR to FD
Can you tell me the screw size (thread / pitch) for the screw that attaches to the FD coming form the WUR ?
This is in a 74' where there's also a banjo connection to the TPS. I'm assuming it's a M6, fine thread... |
||
09-17-2013, 06:46 AM
|
|
|
Fleabit peanut monkey
|
PET does not list any size. Part is NLA here.
These folks say they have it. Porsche 911 1974-1977 Screw socket… #53 below, correct? 
__________________
1981 911SC Targa |
||
|
09-17-2013, 07:42 AM
|
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
Yes its #53.
It's just that I'm away from the car and need to buy a nut that fits in there. |
||
|
09-17-2013, 07:52 AM
|
|
|
Fleabit peanut monkey
|
it is not a standard "hardware" part. It has a hole through it for fuel to flow and a shoulder on the FD side to squish the crush rings.
__________________
1981 911SC Targa |
||
|
09-17-2013, 08:00 AM
|
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
I know...
I just need a nut that screws on the threaded part |
||
|
09-17-2013, 08:04 AM
|
|
1981 Porsche 911 SC Targa
